¡¡¡¡If the gloss of the stone itself is very high, long-term scrubbing may destroy its structure and damage its gloss. Therefore, even if you do a deep protection treatment on the surface of the Phalaenopsis stone, how good the effect is, it will inevitably become dirty and dim. For example, when pedestrians enter and exit the floor of a busy hotel lobby, they need to be cleaned and treated every day and scrubbed with water. This only needs to be treated with a surface-type protective agent that can be removed. If it is a living room in a family, there is no need to clean the Phalaenopsis stone every day, and you can use some waterproof penetrating protective agent for maintenance work.

¡¡¡¡After using the permeable protective agent to care for the Phalaenopsis stone, it is necessary to remind that there is no permeable protective agent that can be used as the protective layer on the most surface of the stone. All the stones that have used the permeable protective agent to protect the surface It is necessary to perform a surface protection treatment, and a surface protection agent is required to apply it again, so that the Phalaenopsis stone cured in this way can be regarded as double protection. In addition, the best curing method for any kind of stone does not need to be waxed, because the waxy layer will cause the phalaenopsis stone to not be breathable, and it is easy to stain stains, and even make the stone surface yellow. Therefore, the use of a surface protective agent that has good air permeability and does not contain waxy substances not only provides a protective layer for the stone, but also keeps the stone pure and natural gloss and beauty.
¡¡¡¡Therefore, before choosing Phalaenopsis stone, it is necessary to consider the natural characteristics of the stone. Bright luster is a factor that cannot be ignored, and the greatest value of the use of Phalaenopsis stone is to ensure its physical properties. If you want to maximize the beauty and practicality of decorative stones in the selected stones, you must take all the characteristics of the Phalaenopsis stone into consideration, so as to better maintain the work.