Marble crystal surface treatment adopts different methods according to the stone flatness, hardness, color and paving position. The main characteristics of natural stone are naturalness, non-renewability and the scarcity of high-end stone, which promotes its exploration cost, production cost, decoration cost, use cost, maintenance cost, and application value. Today, let's take a look at Xiaobian Jiahao, how to deal with marble crystal face stone?

　　First, white and light-colored stones will turn yellow when polished with ordinary steel wire mats. Generally adopt three methods to avoid

　　1. Use stainless steel wire pad for polishing

　　2. Polished with crystal surface agent, crystal surface agent will not make ordinary steel wire mats rust

　　3. Polish the crystal hard powder with a scouring pad. Both dry and wet operations are possible

　　Second, bathroom floor, countertop, wall surface: It is recommended to use a crystal surface agent, which has better waterproof and anti-slip effects. Use portable polishing machine to polish countertops and walls

　　Third, the stone with high hardness: The marble with high hardness has similar characteristics to granite, and the effect of using marble crystal surface agent is not ideal, and the effect of using granite crystal surface agent will be very good. For example, stone such as big flower green, colorful stone

　　Fourth, stairs and narrow spaces: It is recommended to use the staircase crystal surface machine for safety and convenience.

　　Fifth, humidity: Too much humidity has a great influence on the crystal surface agent, and the stone must be dry before making the crystal.

　　Sixth, marble flatness: The flatness directly affects the brightness effect. On the one hand, poor flatness will increase the polishing time, and on the other hand, the amount of crystal surface agent will increase. Long-term use of the wet method will cause some damage to the stone. If the flatness is poor, the crystal surface agent is generally used to repair the slight scratches of the stone. It is recommended to flatten and refurbish the crystal surface. Generally, the marble is polished with a diamond mill 800 number can be used as crystal face.